The Solar Cat Eyes is a modern road safety device that is mounted on the surface of the road. It is a solar system road stud made mainly of aluminum and polycarbonate. It is very strong; heavy trucks, buses, and trucks pass over it without any problem. It charges the battery with solar-like light and heat from the sun and glows in low light. It works like a solar- panel that we use in our home. It has a modern day-night sensor that lights up in low light or at night. There are some types that blaze all the time and some that blaze and go off. It is not destroyed by rain, mud, water, fog. It also sustains itself in temperatures from -20 degrees to 80 degrees Celsius. It remains unbroken even under loads of up to 30 tones. Its LED light shines in different colors like red, blue, yellow, white, etc. At night it can be seen from a distance of about 1000 meters or more. This makes it easier for motorists to drive on the roads at night.​

It is a modern device for road safety. It uses energy from direct sunlight to show road markings in low light. It works as follows:
Sunlight absorption and charging: During the day, the solar panel on top of the solar road stud absorbs sunlight and charges the battery. Although the battery is small, it is mighty and has a good charge retention capacity. Once fully charged, it burns easily for about 40 to 60 hours.
Day-night sensor: The sensor in the middle lights up when there is low light and does not light up when there is daylight. But it lights up when the sky is cloudy or dense fog. It charges daily and lights up at night to increase road safety.​

These solar road signs are of different types.
Based on shape: Based on shape, these are of different types like round, triangular, square, etc. One is the Cat's Eye type, because it looks like a cat's eye, hence the name.
Blinking Basis: This is of two types; one is low light and the other is blinking or on and off. Most blinking road studs are used this much.
Based on the material: Based on the material is of different types such as plastic, rubber, and aluminum. Aluminum studs are more expensive but very durable and long-lasting.​

These types of Road Stud Solar have a huge load capacity. Even if high-loaded trucks, buses, and cargo go, nothing will happen. Because its body material is made of very strong aluminum and polycarbonate. It is capable of carrying loads up to 30 tons. Heavy traffic can cause it to buckle. Some plastic bodies have studs that reduce their capacity. Since its size is a little big, its load capacity is also high. Moreover, its LED lights are made of polycarbonate, which does not break even at high speeds or the weight of the car.​

Solar Road Stud Light stud is a modern technology device used to increase road safety. These are solar-powered small LED lights, which are placed on the side or in the middle of the road. They charge themselves by absorbing sunlight during the day and light up at night to help drivers see the road. They are used because they are eco-friendly, self-contained, durable, and require very little maintenance. Solar road studs are used at road junctions, tunnel entrances, roundabouts, etc. to warn drivers. They help drivers see the road even in foggy weather or darkness and reduce accidents. All in all, solar road studs are a smart and sustainable solution that plays an important role in enhancing road safety.​

Solar Powered Road Studs are used in various important places to increase road safety. For example:
Road junctions: At junctions, solar road studs can be used to warn drivers ahead of the junction.
At Tunnel Entrance: Solar road studs are used at tunnel entrances to inform drivers about the tunnel entrance.
Roundabouts: Solar Type Road Stud Light signs are used at roundabouts to alert drivers to the location of roundabouts.
Both sides of the road: Drivers are informed about the road limits using solar road studs on both sides of the road.
Parking Lot: Parking spaces are marked for motorists using solar road studs in parking lots.
Besides, roads can be planted at various places for beautification at night. Can be installed in cantonments, resorts, and tourist places. It will ensure both beauty and safety at the same time.

Solar Flashing Road Stud are generally made of a few key components. The main components of a solar road stud are:
Body Material: It is made of strong materials, mainly aluminum and polycarbonate. Which is long-lasting and strong.
Solar Panel: This is the most important part of the study. We know that Solar panel absorb sunlight and convert into electricity. This electricity is used to power the LED lamp in the stud.
Battery: The electricity generated by the solar panel is stored in a small battery. At night or in low light when there is no sunlight, the LED lamp lights up using the electricity stored in this battery.
LED light: The top of the stud has one or more LED lights. These lights illuminate at night to warn drivers.
Circuit Board: A circuit board is used to connect the various components of the stud. This board handles the electrical work of the stud.
A Solar Cat Eyes is made with these materials.​

The lifetime of solar road studs depends on various factors, such as stud material, installation method, weather, and traffic pressure. Generally, a quality solar road stud can provide service for 5 to 10 years. However, if the Solar Road Stud Light is made of high-quality materials and installed correctly, it can be durable for a longer period. But if the vehicle is overloaded, then its lifetime may decrease.​

Solar road indicator light batteries are very powerful. These road studs usually use lithium ion or nickel-metal hydride (NiMH) batteries. Lithium-ion batteries are more energy efficient and can hold a charge for longer time. Battery capacities typically range from 200 milliampere hours (mAh) to 1000 milliampere hours (mAh). Moreover, since it is dustproof and waterproof, there is no reason for its battery to be lost. And if the battery is not lost, it will charge when it gets light, and since it will be charged, then I see no reason for the battery to run out. But since the electronics are gone, we have skilled technicians to install the batteries.​

Road Solar Reflectors come in different sizes. Its size varies depending on the type of stud. A slightly larger size stud is needed for more light. Besides, if the solar panel is kept a little bigger, the charge will be faster, while the battery will be a little bigger in size. The size of the stud will increase. Somewhat larger-sized studs are used to withstand the pressure in areas where heavy traffic is carried. Usually, the size is 125*110*25MM. Its weight is 450 grams. Besides, solar road studs of smaller and larger sizes can be customized.​

Solar roads have certain advantages that make them popular. For example:
Eco-Friendly: Solar road studs are eco-friendly as they use solar energy. As a result, no fossil fuel is used and no harmful emissions are emitted.
Self-sufficient: Sunlight is their source of nergy. So once installed, they charge themselves and light up at night. No electrical connection is required.
Durable: Solar road studs made of high-quality material are durable for many years. Their maintenance cost is also very low.
Increases Safety: Lights up at night to help drivers see the road and prevent accidents. They are especially effective in foggy weather or darkness.
Easy Installation: They can be easily installed on the road and removed when needed.
To summarize, solar road studs are an eco-friendly, self-contained, long-lasting, and safe solution that plays an important role in enhancing road safety.

There is no chance of water getting inside the Solar Road Reflectors when it rains, as it is IP68 rated, which means the stud is completely protected against dust and will not happen even if it is submerged in two meters or more of water. No matter how much it rains, water will not enter it. However, if an overloaded vehicle is moving on the road, then the road studs may be bent or broken, and water may enter between them​

Road Solar Reflectors Light can be seen from a distance of about 1000 meters or 1 km, but this distance can be reduced in case of heavy fog. But the intense light of this LED can be seen from a distance of 400 to 500 meters, no matter how foggy it is. These solar panel road studs are very useful when motorists are in a dilemma due to dense fog where the direction or turn of the road can be understood.​

Led Road Studs are very strong and durable in design. It is water- and dustproof. Load capacity up to 30 tons. But in some cases, these can wear out; for example, when the vehicle is overloaded, it can corrode or break. In that case, water will enter through the broken device and damage its electrical equipment. Besides, the battery will not be charged on the roads where there is no sunlight at all; there is shade all the time. If this device is used for a long time, the battery may become weak and its performance may be lost. Inevitably, during the road renovation process, there is a possibility of damage to it.​

Having stock or not and comparing to the world market, this products price can be up & down. But right now, The Solar Road Stud Lighting Starting Price is 2,500 Taka Price in Bangladesh. If you want to buy, the price can be up & down depending on the feature, specification and other customization.