This slaughterhouse carcass splitting machine is highly professional. It adopts imported technology. After cattle peeling, opening the chest, getting read white viscera, it performs to finish the cattle splitting half. This machine was made by SS 304 with a strong balancer and completely closed with a three-phase motor. The cover sensor allows only while cutting process. Especially the water injection system (automatic hot and cold water) makes it more comfortable and attractive.​

You have to check the electricity line or machine’s condition before this semi-automatic machine starts. You need a skilled operator to operate this saw machine. Keep your left hand on the control handle. Secondly, just push your other hand on the rear handle and place the saw machine between the two legs. Now start the machine and cut through the tail bone. Push down the saw all the way forward until you have completed the cut. There is a water spray system on the machine. It will keep the blade neat and clean from blood or wastage.​

Your employees may be affected if they misused the tool. You can save your employees from damage by following the instruction below.
1. Instruct the worker to check the electricity line before starting the machine to avoid any kind of error.
2. Instruct the worker to turn off the machine, if detected any kind of error.
3. This Electric cattle splitting saw machine should be clean all the time and do not walk or stand in front of the machine when in use.
4. Point out to all the workers which may danger to misuse of the tool.
5. Do not make changes or modifications to the tools if the tools are damaged. Just call us, our expert service team will solve your problem as soon as possible.
6. After all, instruct all personnel to read the whole instruction book carefully.​

The capacity of a carcass-splitting saw machine is depending on the efficiency of an operator and which country had made this product. If this is an American product, you can split a minimum of 100 slaughtered cattle in an hour. If it is a china product, you can split around 50 cattle in an hour.​

First of all, a balancer is must need for use of this tool. The weight of the tool must fall within the weight range of the balancer. Install the balancer in the work area. The balancer must have fully vertical travel so that an operator can reach the whole work area without any trouble. Adjust the balancer according to the operator’s comfort.​

There are different sizes of the machine are available in a slaughterhouse plant. This is a super-fast machine for cutting into halves. This machine, made up of electric motor and heavy structures has a size of 45*150*230 cm. However, the size of the machine may different types. It can depend on the quality. This Electric cattle splitting saw machine comes stronger as it has a double trigger system.​

The weight of this dairy Splitting saw machine has started from 70 kg to 130 kg approximately.​

The abattoir splitting blade was made of stainless steel. A big slaughtered cow can easily split by this sharpener saw blade. It’s an anti-corrosion blade. Generally, with this superior blade, you can split 400-600 cattle in an hour. This saw blade thickness the loss of bone and minced.​

This splitting saw machine was made of stainless steel. This is very durable and high performance. This machine was designed with dual rear handles. These dual rear handles can give an operator much comfortable. This machine is a high production solution to beef loin dropping. The saw blade is the main attraction of this machine. This machine has a special water injection system. This water injection system keeps a saw blade neat and clean.​

There are lots of splitting saw for beef machines are available in the market. But if you use our compact band saw machine you can get a lot of advantages. It’s highly accurate for specific split positioning. No bones will be splintered. It’s easy to clean to ensure health protection. It has a low voltage motor, that’s why it reduces the electricity bill. Very simple to operate. It can reduce the number of laborers. Low noise with low vibration. It can give you a long-life service because it’s a robust construction. Anti-tie-down switches are waterproof. This machine is extremely suited for hot and cold-water spray. Safe for the operator.​

Generally, this commercial splitting saw machine is used in any kind of slaughterhouse. It could be for big size cattle, horses or bulls or goats, etc. Besides slaughterhouses, it could be used in large food shops, big butcher shops, food, and beverage factories too. It can be used in a small-scale slaughterhouse too.​

As A splitting band saw half-carcass machine is motor conductive, there will be a little sound. For low-voltage motors, there’s not much sound. The frequency of this machine is 50hz. So, there will be no noise pollution. This machine produces minimal vibration, that’s why it’s safe and reliable to use too.​

You can use a generator, IPS, or high-power solar to operate a butcher splitting saw machine instead of electricity.​

This slaughterhouse carcass splitting machine can be operated at 240 voltage of electricity. The cost of the electricity bill will not be more than 800-1000 taka in a month. It can be highly cost-effective with low power consumption.​

This electric meat splitting saw machine is waterproof. Most of the equipment of this saw machine is strongly waterproof. That’s why the demand for our machine is so high. It has an anti-tie-down switch which one waterproof too.​

Yes. The condition of a cattle supply splitting saw machine is fresh. If you use oil and grease regularly you will get a highly accurate and super-fast service from our machine. There is no compromise with hygiene and safety. Its actual best possible hygiene, spooked wheels, flat-surfaced housings and completely starting doors- for fast, easy, and complete cleaning.​

1. Do not operate this machine until you have received training.
2. Do not operate this machine until you have read the safety instruction and operating manuals.
3. Stop using a defective tool immediately and confirm to the supervisor.
4. Do not try to repair the tool yourself.
5. Keep away unauthorized people from the tool.
6. Never tie-down, Bypass or modify the activating switch of this tool.
7. Be constantly alert for unsafe conditions and report them immediately to your supervisor.
8. Never allow anyone to keep their hands or their body on the cutting path.
9. Do not turn on control switches or triggers of the Splitting beef carcass machine unless you intend to test this tool.
10. Do not use these tools for any purpose except to splitting a carcass of cattle. Be safe.
11. When operating this machine, please wear protective gear and safety equipment.
12. For the ear and sound protection gear is must require.

There is a very low maintenance cost to use our reciprocating type splitting machine. The blade has a superior life. With one blade you can halve a lot of cattle approximately 800-1000. This machine needs only Oil lubrication and grease lubrication for smooth operation.​

Having stock or not and comparing to the world market, this products price can be up & down. But right now, The Electric Cattle Splitting Saw Machine Starting Cost is 2,50,000 Taka price in Bangladesh. If you want to buy, the price can be up & down depending on the feature, specification and other customization.​​