Reflective Motorway Road mark the lanes and edges of the roads or highways. Every color indicates a separate part of the road. For example, the white Motorway Road Studs indicate the lanes or the middle of a road while the red Motorway Road Studs indicate the left side of a road. And the green Motorway Road Studs identify the side of the main carriageway at lay-bys and slip roads.​

Motorway reflective studs that are also known as cat's eyes are created to be most useful in bad light or bad weather conditions by reflecting light back to the driver to imply which side of the motorway they are driving on, or where they should exit.​

A slip lane or slip road is a type of road at a crossing that supports people to switch roads without joining an intersection. The slip roads are basically seen at the crossing of two busy roads, Reflective Motorway Road Studs as an entrance to a busy road like a dual carriageway and are the single centers to join a motorway.​

A great way of memorizing the view of the green, red, amber, white and fluorescent green/yellow studs are being to draw out a motorway design and apply some colored pens to symbolize where each of the Motorway Road Studs is in the road plan.​

Aluminum Motorway Road Studs are more durable than plastic. However, in a country like Bangladesh, plastic Motorway Road Studs are more widely used. This is the reason why we provide both aluminum and high-quality plastic Reflective Motor Road Studs.​

To make the reflective Motorway Studs more reflective, 100*100*20mm size would be fine.

If you go for plastic solar Motorway Road Studs, 7-10 tons’ capacity would be fine in terms of plastic. However, you can get up to 40 tons of capacity Motorway Road Studs as well.​

If the intelligent road studs is installed on the surface of the road, it gives the drivers knowledge about the direction of the road even in bad weather. They help to develop the capacity of roads.​

An important feature of the cat's eye is the elastic rubber dome that is hardly damaged by the passage of traffic. The fixed rubber wiper sweeps the surface of the reflectors as they settle below the surface of the road. And the base holds water after a drizzle of rain, Reflective Motorway Road Studs making this method even more effective.​

1. Mark the Position
To install Motorway Road Studs securely, secure the workers and street first! Then mark the suitable spot for the Motorway Road Studs.
2. Milling the hole
The hole needs to have a width of 160mm. The depth should be around 30mm. You can use a milling head but it is convincing to use a common diamond drill core too. Now drill the hole with a machine.
3. Cleaning the hole
For a suitable fit of the Motorway Road Studs, the hole should be cleaned and dried.
4. Glue the Motorway Road Studs
With sticky tape, you can secure the solar underfloor light just as in the street. In this way, an unsavory cleaning can be stopped later on.
5. Final Touch
Because of the overflow scores in the Motorway Road Studs housing, the extra glue can get away from unrestrained. It enables a simple and specific alignment of the light. The extra material is taken off with fabric. Later, eliminate the sticky tape from the light just as around the hole.​

Reflective roads stud is highly recommended for highways, airports, sea ports, terminals, parking lots, tunnels, farms, schools, walkways and many more.​

The hard shoulder is the spot at the side of a road where you are permitted to stop if your car breaks down.​

The studs between the carriageway and the hard shoulder tend to be red. These change to the green where there's a slip road, supporting you to recognize slip roads when visibility is bad or in the dark.​

Having stock or not and comparing to the world market, this products price can be up & down. But right now, The Reflective Motorway Road Studs Starting Cost is 550 Taka Price in Bangladesh. If you want to buy, the price can be up & down depending on the feature, specification and other customization.​